Hi all, I'm usually in the suoer duty section because of my f350 but I frequent here a lot also. After reading all the threads on ex spring swaps I was wondering where I could buy the factory Excursion rear leaf spacers? The ex uses thicker ones than the superduty trucks and since I need new squeak pads I was gonna add new Center spacers also. Here's a pic from another thread on it, and thank you in advance

 

Check with @ATS Junior and see if they have the spacers you need.

ATS is a SV here who has helped out many members.

Stewart

 

ATS Junior is where I got mine. He can fix right up.

 

Thanks guys I'll call tomorrow

 

If not there, you can get sheets of 1/16" teflon or polyurethane (high density) from McMaster Carr and cut to fit. I am just about to do this to a set of Explorer springs.