I need power steering pump brackets and pulley that will fit a 300/240 in a 66 F100. I also need a 2 groove crankshaft pulley and the correct pitman arm for a 78 steering box on the same vehicle.

Please and thank you,
Jeremy

UPDATE: The pitman arm I need is marked C9TA-3590-E which is Ford part number C9TZ-3590-C. This is for a pre 1971 F100/F150/F250 with the "Saginaw" steering box.

 

are you needing parts??

 

Already got the ps pulley and brackets. Still need the crankshaft pulley, but learned that there's an accessory pulley I can bolt on. Waiting to get the ps pulley I ordered and see what size groove it has. Still need the pitman arm too, trying to figure out if there's one I can use with my current center link.

 

Got the pulley, just need the pitman arm now.

 

off what year box,do you have a part number,i have a few,just need to check make sure its what you are looking for,

 

The box would be for a 1969-1979, I believe all the Saginaw/Ford boxes were the same. If you look at pitman arm itself, it should be stamped C9TA-3590-E.

 

will look at mine for a c9ta-3590-e,i just took one off a 70 f100 last week

 

You do know you are in the "trading feed back" forum and NOT in the Wanted to Buy forum right?

Maybe try here for better results. WTB - Parts & other - Ford Truck Enthusiasts Forums

 

Oops, no I didn't realize that. Thanks, I'll try again.