Hey guys, I'm looking for an hpop for a 04 6.0. anyone have a good used one or know anyone?

 

Don't know of any right off hand. But I can keep my eyes and ears open for ya.

Check local craigslist or even around the state, I'm sure with the network of guys we can make arrangements to meet with you.

 

Thanks toyman!

 

So I guess there is no rebuilding option for this hpop

 

If I recall correctly, there is a way to upgrade to the 05+ pump and fuel rails. This gives you the ability to use more readily available parts going forward.
Glad to see you made it over here. Just remember, it's a little slow around here on the weekends.

 

I'll try to find you a link later today. You should post in this thread to get the spreadsheets emailed to you. https://www.ford-trucks.com/forums/7...ew-owners.html
Lots of good reading in the spreadsheets.

 

Can anyone tell me that if the lpop is not moving oil to the filter housing, should I or will I still have a good pressure reading on my scan gauge?

 

Is there a way that the lpop should be primed after installing new gears and cover?

 

Typically, the only way to prime that type of pump is to fill it from the top. The 6.0 threads are going to get you answers a lot quicker than in here.

Jimmy would know, I think he was in his last year and did all that. How many miles on yours.

 

Almost 400,000 miles on her. Not sure if the previous owner did anything to it or not. Looks like one of the injectors was changed that's all I can tell.

 

Wow, that's a bunch of miles. Nice to hear it's still going.

From some readings it's more common for people to just replace the hpop on the 6.0. Have to check the stand pipes and Stc fitting to make sure it's not losing pressure through there. Very possible the lpop is out with that many miles.

 

I'd fix it with four hundred and forty-four cubic inches.

 

Here's some of the back story Rich. https://www.ford-trucks.com/forums/1...nded-help.html

 

looking for four 7.5-16 or similar tires, not too picky just need something to get on the road, and a 10K reese hitch to fit a cab and chassis frame (75 F350).

 

You should post this in the buy/sell/trade thread that's stickied at the top of the main Michigan Chapter page.