I have a bad wire inside the park light / turn signal assembly. Lmc sells everything but the piece I need , (the housing with the pigtail). Saw several on eBay for 50$ or more. It's the drivers side . Please help if you can.

 

look at this one

1966 Ford Truck F100 RH Front Turn Signal and Housing | eBay

 

Thanks , I searched for quite a while last night to no avail. Problem solved

 

Keith:
That's the right side. You need the driver's (left) side.

 

I think the housing / pigtails are the same. It's the "signal window" that is different but I'll check.

 

The pigtails and sockets are the same, but the housings are different and marked LH or RH. I found out because I looked for one last night for you, but found that I only had the right hand one. The sockets are "pressed" into the housings and would be tough to remove.

 

Thanks for the clarification.. I'll keep looking.

 

Housings are right & left specific.

Ford sold the lamp complete, or just the housing w/wires by itself. The lens and the gaskets, R&L bezels were also available separately.

1965 F100/750; 1966 F100/750 before serial number 788,001:

C5TZ-13201-J .. Left (Drivers Side) Parking Lamp Assy / Obsolete

MCDONALD OBSOLETE PARTS CO. in Rockport IN has 19 = 812-359-4965.
------------------------------------------------------------------------------------
C5TZ-13207-H .. Left Parking Lamp Body w/Wiring / Obsolete

NOS PARTS LTD in Waxahachie TX has 1 = 972-937-2201.

KLIMESH MOTOR SALES in Calmar IA has 1 = 563-562-3241.

OBSOLETE RELIABLE PARTS in Nashville GA has 1 = 229-686-5101.

MILLER OBSOLETE PARTS in Binghamton NY has 1 = 607-722-5371.
-----------------------------------------------------------------------------
1966 from serial number 788,001 is different. I don't know what the difference is.

Upper picture:

 

Thanks number dummy,

 

I ordered the C5TZ-13201-J, from mcdonald, it has a ground wire soldered to the housing and only 1 wire coming out of the back of the housing, maybe someone can offer up their opinion. my old one has 2 wires coming out of the housing, which leads me to believe that what I actually need is the C5TZ-13207-H. please help if I'm not getting the big picture.

 

Keith, the difference between them is this

13200 and 13201 are the complete assembly, meaning it includes some of the other related pieces like the gaskets, lens, hardware and bulb.

13206 and 13207 are just the housing and pigtail itself. No extra goodies are included.

Chad

.

 

According to the parts catalog, left park lamp assy C5TZ-13201-J uses a double filament bulb, so its socket has two contacts & wires.

 

OK, now you are quoting me before I even get done with my post. I try to avoid it for you. How about the same courtesy?

I'm not even sure why you quote me since it is Keith asking about the wires.

Chad

.

 

I typed my post 5 minutes after yours was posted. All I did was confirm the number of contacts and wires for the C5TZ-13201-J park lamp assy.

 

Ummm, there's only 5 minutes between my post and yours. Come on....I've asked you before to not quote me....

Chad

.