1987 f250 external slave cylinder problem
#1
1987 f250 external slave cylinder problem
I have removed the slave cylinder from the side of the tranny.. Removed the roll pin. The line will not budge out of the slave cylinder.. It is the stock slave and line.. I have put heat on it put lube on it,.. I've tried everything I could. Any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
Pitweiller13
Clutch, Transmission, Differential, Axle & Transfer Case
0
01-19-2016 10:35 PM
tcd
Clutch, Transmission, Differential, Axle & Transfer Case
2
10-19-2004 07:41 PM