valve covers in van
#1
valve covers in van
how on earth---
I'm looking to change the glow plugs & injector O-rings
on this project bus/rv
I'm just wondering if there is a way to do it at all
thers no room!!!!!
any body else do this already-- on my pick-up- that took hours--
this may be days
ps how do I add pictures --
I'm looking to change the glow plugs & injector O-rings
on this project bus/rv
I'm just wondering if there is a way to do it at all
thers no room!!!!!
any body else do this already-- on my pick-up- that took hours--
this may be days
ps how do I add pictures --
#2
#3
Vans suck, no two ways about it.
On the 6.0's we remove one engine mount and roll the engine to get to the valve covers. Maybe raise the motor and remove both engine mounts, then drop it back down.
3rd back on passenger side is right in line with bulkhead and you have to take injector out in pieces.
On the 6.0's we remove one engine mount and roll the engine to get to the valve covers. Maybe raise the motor and remove both engine mounts, then drop it back down.
3rd back on passenger side is right in line with bulkhead and you have to take injector out in pieces.
__________________
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
Thread
Thread Starter
Forum
Replies
Last Post
Maninblack12
1968-Present E-Series Van/Cutaway/Chassis
27
04-20-2012 11:05 PM
mrblonde108
1994.5 - 1997 7.3L Power Stroke Diesel
7
01-03-2012 07:37 AM