Ok sorry guys doing some measuring. ... trying to find out stock hight on a srw 350 4x4. .. center of front and rear hub to center of bottom of fender.... I know its probably not the right way just trying to see where I set compared to stock... my front is at 25 3/4" center hub to center bottom of fender back is 26 3/4" from center hub.to bottom of center bed side fender. .... thanks for the help

 

Sky engineering has a stock shock measurement on their rsk add I believe

 

Ok wasn't really looking for shock hight but that might help me see if iam close to stock hight

 

Okay up date buddy has a 350 drw and front cenrwr hub to center bottom of fender is 22 1/4 in iam at 25 3/4 so iam 3 1/2 over stock 350.... unless
There is a height difrents in srw and drw

 

If you know stock then measure yours and that will tell you where you are. Shock mounting is static... Not sure how else to be exact more?!?!

 

stock F-350 suspension will have a 4 inch block between the rear axle and the spring.

it will also have a slight negative arch or flat front spring. if the front spring has a positive arch, it has a lift kit installed.