Feb 2016
#1
Feb 2016
Hey Guys,
I hope all is well. Have any of you heard or been to this?
Moultrie Automotive Swap Meet & Car Corral in Moultrie, GA. (888) 686-2102
I hope all is well. Have any of you heard or been to this?
Moultrie Automotive Swap Meet & Car Corral in Moultrie, GA. (888) 686-2102
#2
Join Date: Aug 2011
Location: Cave Spring Georgia
Posts: 4,321
Likes: 0
Received 12 Likes
on
9 Posts
I have and it was the best with tons of vendors. It's like going to the fair only with cars and parts. If I lived closer I would probably go again.
Sorry I am lacking on my job again getting the monthly chat up. I forgot it was the 1st.
I spent all morning at the hospital getting a stress test done on the old ticker. The doctor wanted to do it because I am retiring not because he thought I had a problem. I was not rushed into emergency bypass surgery so I guess everything is fine.
Sorry I am lacking on my job again getting the monthly chat up. I forgot it was the 1st.
I spent all morning at the hospital getting a stress test done on the old ticker. The doctor wanted to do it because I am retiring not because he thought I had a problem. I was not rushed into emergency bypass surgery so I guess everything is fine.
#3
I have and it was the best with tons of vendors. It's like going to the fair only with cars and parts. If I lived closer I would probably go again.
Sorry I am lacking on my job again getting the monthly chat up. I forgot it was the 1st.
I spent all morning at the hospital getting a stress test done on the old ticker. The doctor wanted to do it because I am retiring not because he thought I had a problem. I was not rushed into emergency bypass surgery so I guess everything is fine.
Sorry I am lacking on my job again getting the monthly chat up. I forgot it was the 1st.
I spent all morning at the hospital getting a stress test done on the old ticker. The doctor wanted to do it because I am retiring not because he thought I had a problem. I was not rushed into emergency bypass surgery so I guess everything is fine.
#4
Hey Guys,
I hope all is well. Have any of you heard or been to this?
Moultrie Automotive Swap Meet & Car Corral in Moultrie, GA. (888) 686-2102
I hope all is well. Have any of you heard or been to this?
Moultrie Automotive Swap Meet & Car Corral in Moultrie, GA. (888) 686-2102
#7
Might be loosing reverse in my Dodge, but on 200k miles, 1 solenoid that was for recall and 4 fluid flushes, Im not surprised. Going to start looking for donors here soon.
Trending Topics
#8
Join Date: Aug 2011
Location: Cave Spring Georgia
Posts: 4,321
Likes: 0
Received 12 Likes
on
9 Posts
I need to replace the torque converter solenoid switch in the Grand AM, It does not like to stay engaged, a known problem with these cars. I can feather the gas when it's cold to keep it engaged but it gets worse as the outside temps get warmer. I am going to service the fluid and filter when I do it. I have almost 150 thousand miles on it.
I have the news on and sort of watching the voting from Iowa, I am just glad to finally have some voting going on.
I have the news on and sort of watching the voting from Iowa, I am just glad to finally have some voting going on.
#11
Well guys I learned I can not just but a 2wd housing on my transmission I would have to replace the shaft as well. Looks like I am going to try and tackle a transmission mod myself (funds won't allow paying someone) wish me luck.
It might be a while before I put in the transmission seeing how I am going to have to convert the tailshaft from 4x4 to 2wd, get a TPS controller and carb sensor.
I might try to swap my engine with a crate first. I am looking for a 302 high rise intake. Do you guys know anyone how has a used one?
It might be a while before I put in the transmission seeing how I am going to have to convert the tailshaft from 4x4 to 2wd, get a TPS controller and carb sensor.
I might try to swap my engine with a crate first. I am looking for a 302 high rise intake. Do you guys know anyone how has a used one?
#12
Well guys I learned I can not just but a 2wd housing on my transmission I would have to replace the shaft as well. Looks like I am going to try and tackle a transmission mod myself (funds won't allow paying someone) wish me luck.
It might be a while before I put in the transmission seeing how I am going to have to convert the tailshaft from 4x4 to 2wd, get a TPS controller and carb sensor.
I might try to swap my engine with a crate first. I am looking for a 302 high rise intake. Do you guys know anyone how has a used one?
It might be a while before I put in the transmission seeing how I am going to have to convert the tailshaft from 4x4 to 2wd, get a TPS controller and carb sensor.
I might try to swap my engine with a crate first. I am looking for a 302 high rise intake. Do you guys know anyone how has a used one?
#13
Since some of you are getting big refunds, yall want to try junkyard day maybe March 5? Here a thought for a monthly get together Project day one Saturday a month. We could get together and help each other with our truck projects.
#14
Unfortunately, I could find anyone to carpool with and a 4hr trip is kind of hard to swallow if I may not find anything. As far as body swap, I am going to pass on that. I want to get this 400hp crate engine and 4 speed transmission more then 4x4 at the moment.