We just bought this 1995 Bronco XLT and wanted to know if anyone can tell us if it has been lifted by looking at the photos. The person we bought it from said he thought it was all stock. I ask because we tried to jack the truck up to take off the tire but the jack couldn't reach the bottom of the frame. We had to use 4 2x4's under the jack before the jack could lift the truck high enough to get the tire off. Thank you.

 

Looks stock to me. If the scissor jack isn't reaching the frame, jack up the axle. I usually put it between the two ubolts.

 

From my '89 F-150 owners manual but it is the same for a Bronco (can't find my '87 manual right now)



Guess you have not had a truck before now? Your method of stacking 2X4s is not a safe idea. Hope you didn't go under the truck.

 

I see the problem now. We were trying to jack up the truck attaching to the frame but the manual calls for going under the axle. Thank you for your replies.