Anyone running 40/20/40 seats front and rear?
#1
Anyone running 40/20/40 seats front and rear?
Look at what I found:
https://dallas.craigslist.org/dal/ptd/5321974386.html
No tears in the seats, he said that there is a little butt rub on drivers side seat but no rip, they look like they will clean up decent. He wants $350 for the front and back seats and another $25 for two interior pieces I am looking to replace as well. I am going out there to look at it tomorrow morning.
Also found another crew cab with a decent front 40/20/40 blue cloth front seat for sale.
So anyone running this set-up front and rear seat? I know it seems like overkill and not even sure you can put a 40/20/40 in the rear. I just think its kind of cool.
https://dallas.craigslist.org/dal/ptd/5321974386.html
No tears in the seats, he said that there is a little butt rub on drivers side seat but no rip, they look like they will clean up decent. He wants $350 for the front and back seats and another $25 for two interior pieces I am looking to replace as well. I am going out there to look at it tomorrow morning.
Also found another crew cab with a decent front 40/20/40 blue cloth front seat for sale.
So anyone running this set-up front and rear seat? I know it seems like overkill and not even sure you can put a 40/20/40 in the rear. I just think its kind of cool.
#4
If the driver's door panel is excellent (doubt it, but you never know), I'd be all over it, even WITH expensive shipping! Seriously, let me know and I'd help ya defray the cost of the rest of it.
I just can't seem to find a nice XLT door panel in blue. All of them I find are faded, scratched, or beat to hell. Honestly, it's not easy finding nice interiors, and the aftermarket hasn't caught up to that generation (yet).
I just can't seem to find a nice XLT door panel in blue. All of them I find are faded, scratched, or beat to hell. Honestly, it's not easy finding nice interiors, and the aftermarket hasn't caught up to that generation (yet).
#6
If the driver's door panel is excellent (doubt it, but you never know), I'd be all over it, even WITH expensive shipping! Seriously, let me know and I'd help ya defray the cost of the rest of it.
I just can't seem to find a nice XLT door panel in blue. All of them I find are faded, scratched, or beat to hell. Honestly, it's not easy finding nice interiors, and the aftermarket hasn't caught up to that generation (yet).
I just can't seem to find a nice XLT door panel in blue. All of them I find are faded, scratched, or beat to hell. Honestly, it's not easy finding nice interiors, and the aftermarket hasn't caught up to that generation (yet).
#7
Trending Topics
#8
The dude was coming down on price real quick over the phone. I am pretty sure with some actual cash in my hand standing there I can leverage for more.
Let me know.
They also have this one at the same place: back seat looks ok. I never did ask about the front on this one to see if any rips or tears since I don't need a gray one.
FOR PARTS A 1996 FORD TRUCK F350 DUALLY FLAT BED DIESEL AND GAS
#9
#10
Drivers side door panel was gone (only one gone, I am guessing its a common part wanted), so was the dash, and the seats were definitely torn in a few places (so basically the dude I talked to on the phone lied). He dropped price to $250 quick once he realized I was walking away and had explained I might as well just get the ones I already have recovered. Could have had both front and back for $200 after talking with the JY owner and I still might have bought them to get my aunt in central TX to reupholster them if the center console wasn't broke too. The tan one was not much better. They had a supercab but the seats were mismatched colors. So no seat purchasing was done today. I am guessing I might still do the superduty seat swap if I can find some nice black ones at a reasonable price.
Wasn't a complete waste of gas money though. Did pick up this obs cup holder and trim piece I needed for $25. The cup holder stays in place really well on the hump. I haven't even put a strap on it and it did not move with a full sonic drink on the drive home. Its a small win in my book.
Wasn't a complete waste of gas money though. Did pick up this obs cup holder and trim piece I needed for $25. The cup holder stays in place really well on the hump. I haven't even put a strap on it and it did not move with a full sonic drink on the drive home. Its a small win in my book.
#12
Good stuff was gone. The D60 upfront, engine, front clip. Can't remember on the bumper but assuming it was too. It was pretty stripped down by the time I got there. I asked the guy about how long it took them to sell the front axle. He said a few days. Some guy drove from Houston to get it. They do get our body style of fords often. I have seen their other ads. They had a front ranch hand listed one time. I wanted to go out and grab it but no $$$ at the time. If you want their contact info I got the owners number. I am pretty sure its listed on the ad.
#13
Switching gears now. I still need a seat for my bronco. Does anyone know if I buy a 40-20-40 out of an extendedcab/supercab truck if it will bolt up in my bronco and also fold forward and such. I have a custom (lowest edition) bronco if that makes a difference. Just want to be sure before I drive around looking at some.
Thread
Thread Starter
Forum
Replies
Last Post
Rocking M
1973 - 1979 F-100 & Larger F-Series Trucks
6
08-16-2002 04:40 AM