2016 BS Thread...
#2
I think Jim may have met some of those "think tank" staff members at his meeting last night.
Tim seems to favor adult beverages from my neck of the woods.
It's 2 degrees bringing in the new year....never got above freezing all day.
Had more fun playing in the junipers again..got a bunch ready to skid out again.
Went to some friends for dinner tonight,,,,we were home by 9:00....wasn't intending to see the new year come in, but here I am.
I hope we can all look forward to a great new year ahead of us.
Tim seems to favor adult beverages from my neck of the woods.
It's 2 degrees bringing in the new year....never got above freezing all day.
Had more fun playing in the junipers again..got a bunch ready to skid out again.
Went to some friends for dinner tonight,,,,we were home by 9:00....wasn't intending to see the new year come in, but here I am.
I hope we can all look forward to a great new year ahead of us.
#3
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,094
Received 3,948 Likes
on
1,580 Posts
#4
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 262,903
Received 4,119 Likes
on
2,649 Posts
#5
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,094
Received 3,948 Likes
on
1,580 Posts
#6
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 262,903
Received 4,119 Likes
on
2,649 Posts
#7
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,094
Received 3,948 Likes
on
1,580 Posts
yes........and boosting the post count......
Trending Topics
#8
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 262,903
Received 4,119 Likes
on
2,649 Posts
#9
Join Date: Jul 2011
Location: Outside of FCI Sheridan
Posts: 15,814
Received 3,941 Likes
on
1,213 Posts
Belated Good Morning Oregon and everyone everywhere else.
HAPPY NEW YEAR!
Stove went so-so. Got it back in and fired it up. Worked like new for about 45 minutes then started acting up again. Started getting an error code for a bad room temp sensor. After doing a "hard reset" on the main board, it seems to be working fine in the "Stove Temp" so I'll put my long johns on, cool it off and then check and see if I pinched the room sensor cable when I "inserted" it back into the fireplace.
No, they were too tall. Staff members I met with were all shorter and had very long ears.......
Jim sets coffee up before bed time. Pot starts "auto brew" at 0430 and is ready for Jim at 0500!
HAPPY NEW YEAR!
Stove went so-so. Got it back in and fired it up. Worked like new for about 45 minutes then started acting up again. Started getting an error code for a bad room temp sensor. After doing a "hard reset" on the main board, it seems to be working fine in the "Stove Temp" so I'll put my long johns on, cool it off and then check and see if I pinched the room sensor cable when I "inserted" it back into the fireplace.
No, they were too tall. Staff members I met with were all shorter and had very long ears.......
Jim sets coffee up before bed time. Pot starts "auto brew" at 0430 and is ready for Jim at 0500!
#11
Join Date: Jan 2006
Location: North Central Washington
Posts: 17,623
Received 3,505 Likes
on
1,386 Posts
Happy 2016! I made it with just a very slight headache this morning. Ended up drinking a couple of Whiskeys last night.
#12
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,094
Received 3,948 Likes
on
1,580 Posts
Drink a couple glasses of water and take 2 aspirin before passing out or going to bed.......Makes the morning better.......
#13
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 262,903
Received 4,119 Likes
on
2,649 Posts
#15
Join Date: Jul 2011
Location: Outside of FCI Sheridan
Posts: 15,814
Received 3,941 Likes
on
1,213 Posts
Well, off for trip #2 to town on the Pellet Stove project. I have a couple of 20 packs of #22 gauge butt connectors around here someplace and do you think I can find them? That's O.K., I'll find them right after I make the 34 mile round trip to Lowes. Bad wire on the room sensor cable.