225 and 215 exhaust manifold
#1
225 and 215 exhaust manifold
Hey I have been searching for a non cracked 223 exhaust manifold for a little while now. I have been able to find one that seems to be in decent shape but upon pulling from the engine the guy found out it was really a 215 engine. I have been looking around to see if the intake/exhaust manifolds are interchangeable and here is what numberdummy had to say
To me that says that it may fit(?) Just trying to get a somewhat definite answer. I thought about scanning him a 223 exhaust manifold gasket I have so that he could print it out and see if it lines up. Not to sure what else to do
Edit: My engine is a 1955 223 and his is supposedly a 215 from a 56. The exhaust manifolds both have the same angled outflow
EAA-9426-A = 1952/53 Passenger Car & Truck 215 I-6 Exhaust Manifold & Thermostat Assy / Obsolete
No Ford Dealer or obsolete parts vendor has any / Edit: This 215 manifold is not listed in Ford parts catalogs for any year 223.
-------------------------------------------------------------------------------------------------------------------------
C3AZ-9426-A (replaced: B4A-9426-A; B8A-9426-A, C1TE-9426-A) .. 1954/64 223 I-6 Exhaust Manifold & Thermostat Assy / Obsolete
Even if it would fit, lotsa luck finding a decent 223 exhaust manifold. Even though used from 1954/64 on trucks and Passenger Cars, it's harder to find than Jimmy Hoffa!
And...no Ford Dealer or obsolete parts vendor has any.
No Ford Dealer or obsolete parts vendor has any / Edit: This 215 manifold is not listed in Ford parts catalogs for any year 223.
-------------------------------------------------------------------------------------------------------------------------
C3AZ-9426-A (replaced: B4A-9426-A; B8A-9426-A, C1TE-9426-A) .. 1954/64 223 I-6 Exhaust Manifold & Thermostat Assy / Obsolete
Even if it would fit, lotsa luck finding a decent 223 exhaust manifold. Even though used from 1954/64 on trucks and Passenger Cars, it's harder to find than Jimmy Hoffa!
And...no Ford Dealer or obsolete parts vendor has any.
Edit: My engine is a 1955 223 and his is supposedly a 215 from a 56. The exhaust manifolds both have the same angled outflow
Thread
Thread Starter
Forum
Replies
Last Post
knuckleharley
WTB - Parts & other
2
01-10-2017 11:33 PM
1sg_steve
1948 - 1956 F1, F100 & Larger F-Series Trucks
8
04-26-2006 10:36 PM