Transfer Case install
#1
11-21-2015, 01:02 PM
Join Date: Aug 2011
Location: Shoreview / Forest Lake
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Transfer Case install
Hey Guys,
'06 F-250 King Ranch Crew Cab 4x4.
I have the old case out, trying to get new case in, I have a trans jack. Seems I can't get it to line up. I'll get to the point where the spline is touching the hole as soon as I start trying to get it to go in I am hung up. Seems the driver's side is tilted to high or the back end is to high and hits the floor board. Any tips?
I have the back end jacked up, and the front on the ground right now.
'06 F-250 King Ranch Crew Cab 4x4.
I have the old case out, trying to get new case in, I have a trans jack. Seems I can't get it to line up. I'll get to the point where the spline is touching the hole as soon as I start trying to get it to go in I am hung up. Seems the driver's side is tilted to high or the back end is to high and hits the floor board. Any tips?
I have the back end jacked up, and the front on the ground right now.
Thread
Thread Starter
Forum
Replies
Last Post
Hazmat 67
1973 - 1979 F-100 & Larger F-Series Trucks
4
06-02-2010 08:18 PM
Ken Kennedy
1973 - 1979 F-100 & Larger F-Series Trucks
2
09-03-1999 06:51 PM