RC's November Truck Chat &Turkey Talk Thread
#526
#528
Here's some pictures for everyone that didn't make it to Ozark yesterday.
First, we stopped and made sure there was enough gas in the tank for the parade.
Then we had to tire it up at U.S. Automotive next to the staging area.
Then we made it all Christmasy.
Carina was ready to have some fun. Tiff was excited, too.
Lined up in the staging lanes.
Here's a shot as we were getting ready to "step off" for the parade.
This picture isn't very good, but this was in the actual parade.
Then we had to tire it back down and load it up at State Farm across town.
First, we stopped and made sure there was enough gas in the tank for the parade.
Then we had to tire it up at U.S. Automotive next to the staging area.
Then we made it all Christmasy.
Carina was ready to have some fun. Tiff was excited, too.
Lined up in the staging lanes.
Here's a shot as we were getting ready to "step off" for the parade.
This picture isn't very good, but this was in the actual parade.
Then we had to tire it back down and load it up at State Farm across town.
#530
I doubt I'm going to make it. I've got a water pump to replace on the Durango so I can drive it to work. If I have any time left to the day, I want to figure out how much of the front part of the 2 piece shaft has to come off and start planning how to fab up the carrier bearing mount if I need it.
Thanks for checking to see if you can source a one piece shaft Alan. I would prefer that route over fabricating something, but now I have a couple of options.
Thanks for checking to see if you can source a one piece shaft Alan. I would prefer that route over fabricating something, but now I have a couple of options.
#531
Alan awesome pics, sorry I missed another chance to lend a hand. I am copy and pasting a couple pf your pics elsewhere on FTE. https://www.ford-trucks.com/forums/1...l#post15811375
#532
#533
#536
Well I'm pretty well convinced the car gods hate me. I got the water pump and fan clutch in, cooling system filled back up, and up to temperature only to discover a heater hose leak. I'm waiting for it to cool back down so I can dump the cooling system again and change them out. At least their relatively easy to get to, just very low in the system. Sigh...
#537