Hey, I hope this wasn't covered in a sticky thread. If so, please forgive me!

I'm wanting to install an intercooler on my 95 F350. I've found the Y pipe intake piece on eBay with a part number 1827742C1 A B01. Will this particular pipe fit on my stock equipment or will I need a new turbo or valve covers? It's hard to tell by the pictures but the inlet on the Y pipe seems too big to mate up with the port on the turbo.

Thanks for any help!

 

Does it tell you for what year it will fit. I put that part # and it shows it' for a late 99 and up 7.3. If so it wont fit. There some e99 spiders but they cost a pretty penny.

 

Yeah, that's what I'm seeing as well. The ad lists it for 1999-2003 so I guess I'm out of luck on that one.

 

You can either go pre fab wich cost $, or the custom alternative using what you have now cut, chop, weld to make it fit. Another is using the oem t444e set-up and try to adapt it to fit, many have done it