I have a new F150, it is 3 weeks old with about 800 miles on the odometer, it is a Lariat that I ordered, fully loaded up with all the new safety system electronics, adaptive cruise control, collision avoidance, cross traffic warning, blind spot warning system and with the fully configurable dash board. All has been working fine for the last 3 weeks since new. Yesterday I noticed 2 irregularities in the configurable dashboard. The first was while the view option was set on the digital speed read out, while driving at 60 mph, the digital readout showed "0" mph. I changed the screen read out to another view option and then back to the digital readout and it was functing fine. The second issue with the dash readout function is when scrolling thru the screens , the name of the screen on the dash flickered before showing the selected screen name. This occurred on all of the options on that subsection, such as digital speed, tire pressure, compass, etc on that section. As the new screen name rolled up, or showed, it it flickered momentarily, about a second, before setting in.
This has not happened before in my brief 3 week history with this truck. Does anyone know why this might be happening or is there a know issue of this and is there a fix. Thank you.

 

Mine hasn't done that. And I'm not aware of a known problem. But I'm subscribed to find out if others know.

 

Thank you for your reply.

 

I have the same truck, Lariat - no problems at all with it.

 

Thank you for your reply

 

Not having that problem but it sounds like a bit of lag from your computer. Maybe the connection is not fully seated, you should take it to the dealer so they can look into\document the problem.