Can someone look at their truck for me and tell me what if need to pull the split bench and/or bucket seats? I'm looking to upgrade seats in my 88 F350 so I don't have a truck on hand to check myself. I'd rather only carry the tools into the yard I'll need.

Thanks in advance.

 

one of those "torx plus" bits I think the size was like a 55 or 60

 

Right T55 torx plus. I used a standerd T55 just have to be carefull, it is slightley smaller.

 

Mine were really tight/seized. Make sure you take a quality bit or you're likely to just shear it. The bolts are exposed under the floor so northern road salt can take its toll.