I recently purchased a 95 F150 regular cab. The door jamb switch on the drivers side was broken. I removed the inside kick panel and found the switch badly burned and the wiring also burned. I purchased a new switch and found the socket with wires at LMC. The question is where do the wires go? Can I splice them in somewhere? I'm new to the forum. My first post. Hope I explained correctly.

 

Lightblue/yellow wire is the power wire.

Black/lightblue wire is the wire going to the interior bulbs.

If you have a third wire, it's for the warning chime and goes to a red/pink wire.

 

How far back was the wire burned? If you can, splice in the new wiring somewhere past where the heat got to the old wiring. You may have to go past the door area and back into the passenger compartment.

 

I can only see about 3" of the wires. They are burned past what I can see.