Hello, just picked up this 66, super solid has a 429/c6/9 inch. need some trim and emblems and ALOT of cleaning. then its going flat black, red wheels, fat white walls.....

 

Welcome to FTE

Nice! I kinda like em with the primer spots

 

Nice... I just finished the blue one in my photo album today. That's it leaving. Other pics are the day it arrived... A year ago! Good luck and have fun

 

does the ignition switch connect right to the outer bezel? nothing inbetween?

 

Your engine and transmission combo sounds nice. I wish i had that. Looks like a very nice start!!! I like satin black over flat but either way it should look great!!

 

just like mine! but i think i'm getting rid of the red wheels.

 

what size are your wheels, 5x5.5?

 

well looks like i may need new heads, pretty sure valve seals are gone

 

Switch is 11572 - 10A885 is the spacer between the switch and the backside of the dash - 11584 is the bezel - 11582 is the cylinder w/key.

The cylinder must be removed first .. then the bezel can be removed by pressing on the backside of the spring loaded switch and pushing it forward.

Remove a battery cable for safety...before sticking your mitts behind the dash.

 

thanks sir, im missing the spacer

 

anybody know what this column fits?

 

C1TF-10885-A .. Spacer-Ignition Switch / Obsolete

Applications: 1961/66 F100/1100 / 1963/69 N/NT/T500/1100 / 1967/69 F800/1000.

NOS PARTS SOURCE in Olathe KS has 1 = 913-220-5746.

PARTS INTERNATIONAL in Farmers Branch TX has 1 = 888-727-0418.

NOS PARTS LTD in Waxahachie TX has 2 = 972-937-2201.

CARPENTER NOS OBSOLETE PARTS in Concord NC has 3,556 (!) = 800-476-9653.

 

C&G Ford parts has them $10 plus shipping, got one coming.

 

Thanks again sir!

 

pre 65. I have a 64 just like it. No rag-joint (shaft goes into the gear box). ND will probably say it's 61-64 F100. do NOT take my word for it.