Hydraulic Conversion
#1
Hydraulic Conversion
Hi all, I'm putting a hydraulic vibrator on the bottom of my dump bed. I have an f450 with a DC electric motor that currently powers the pump. That pump came with the truck and dump body and is used for the dump bodies cylinder. I'm trying to get an idea of how much gpm it is capable of. Any one know what is typical? I'm looking to get 5gpm out of it hopefully.
Thanks, Andrew
Thanks, Andrew
#2
Your best bet is to look for any identifying information on the pump and talk to the manufacturer if its not labeled on the pump itself. I don't know that there is a "typical" for dump cylinder pumps as there are so many different companies outfitting dump bodies of all different sizes and loads.
Thread
Thread Starter
Forum
Replies
Last Post
Bucsfan552
1948 - 1956 F1, F100 & Larger F-Series Trucks
5
03-19-2012 08:19 PM
TheKirbyMan
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
17
08-11-2009 04:31 PM
Muldo
1987 - 1996 F150 & Larger F-Series Trucks
5
09-29-2008 03:32 PM