Hickok BB-1 EEC-IV Breakout Box
#1
03-15-2015, 10:26 PM
Join Date: May 2014
Location: Mesquite
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Hickok BB-1 EEC-IV Breakout Box
Do you have a mid 80's and up Ford EEC-IV fuel injected system? If you work on your vehicle yourself you know how difficult it is on OBDI vehicles to determine what signals are missing due to the limited information the diagnostic interface provides.
The Hickok Break Out Box (BOB) allows you to get on the EEC (computer/sensor) connector and actually test sensors and look at signal levels using basic test equipment.
While troubleshooting this is an essential piece of equipment. Reduce the amount of time and frustration spent solving problems.
Includes adapter that fits between EEC and connector plus jumper cables.
$75 OBO
The Hickok Break Out Box (BOB) allows you to get on the EEC (computer/sensor) connector and actually test sensors and look at signal levels using basic test equipment.
While troubleshooting this is an essential piece of equipment. Reduce the amount of time and frustration spent solving problems.
Includes adapter that fits between EEC and connector plus jumper cables.
$75 OBO
Last edited by fgcox1; 03-15-2015 at 11:06 PM. Reason: Price
Thread
Thread Starter
Forum
Replies
Last Post
WoodHeat
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
08-16-2010 03:52 AM
hl649
1987 - 1996 F150 & Larger F-Series Trucks
6
08-02-2003 04:45 AM