Nothing now. I can get some in the morning.

 

Good morning MN!

Monday........but looks like a warm up in sight.

 

Good morning Cory and the rest of the gang.. Monday found us again!!!

Hope this week goes fast and the ground dries out down here a bit...

 

Good morning Cory, Randy and the rest of MN!

Monday is here again!

 

Good morning guys.

Good job on the truck box lift Troy.

 

Good morning Jay! Thanks!

 

Here is a couple pics of the hitch I removed.

 

That thing looks pretty stout!

 

For a homemade hitch it was built well. The thread pattern for the ball is a real odd thread compared to most though. Very course thread.

 

Good morning guys.

That's an interesting hitch there Troy. Don't lose the ball, might have a hard time finding a new one.

Putting a B&W in there?

 

Good morning Mike!

That was the problem Mike. The truck didn't come with the ball and the dealer didn't have it and I couldn't find one with the correct thread. So I am just going with the rail kit and putting my fifth wheel hitch in there out of my old truck. I bought the gooseneck adapter that drops into the rails so now I have both the fifth wheel hitch and the regular ball for a gooseneck. Going with a B&W and then having to get a companion hitch would have been way expensive!

 

The thread in must work fine down south where you don't have to deal with salt and rust.

 

Looks like a beefed up version of this:

2 5/16 gooseneck ball odd shank size ? - Pirate4x4.Com : 4x4 and Off-Road Forum

 

Exactly and if it was removed all the time when not in use and kept a little grease in the threads it would probably be fine up here as well but what a pain in the ****!

 

Good evening gang.