I got a 93 f250 with a 351w and e4od. I'm wanting to stroke it to a 393 or 408. But keep my efi. I wouldn't mind going to a maf conversion but what all will I need. Since I have a e4od I heard it's a pain. Would a 460 computer with a e4od work then make the harness and get a maf setup? Also what cam would be a good choice. What about just switching to a 460 sd computer?

 

A MAF swap with the E4OD is more involved but I think a 408 could be made to run on an SD 460 PCM. If doing the MAF swap you could even use a 5.0/E4OD PCM but you will need a Moates Quarterhorse or EEC Tweecer to modify the tables for all the upgraded components needed to feed a stroker.