Do later year C series cabovers have master cylinders not at base of pedal?
#1
01-29-2015, 09:26 PM
Join Date: Dec 2014
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Do later year C series cabovers have master cylinders not at base of pedal?
My 58 C800 has the master cylinder attached to the brake pedal inside the cab. It is a hydraulic brake set up.
Any later year cabovers that relocated the master cylinder outside of the cab area that is a non airbrake set up? I was looking to modify mine.
Any later year cabovers that relocated the master cylinder outside of the cab area that is a non airbrake set up? I was looking to modify mine.
#2
01-30-2015, 03:15 AM
Nope; they are all the same since day one. Master cyl available from
Napa just got one, about $70 bucks (new)
#3
01-30-2015, 04:24 AM
All 1957 and later C series Tilt Cabs with hydraulic brakes have a clutch master cylinder and a clutch slave cylinder.
Left: 1957/63 Ford Truck Parts Catalog / Right: 1980/89 Ford Heavy (600/900) Truck Parts Catalog.
Notice, however the differences between the older master/slave cylinders and the later model parts.
Left: 1957/63 Ford Truck Parts Catalog / Right: 1980/89 Ford Heavy (600/900) Truck Parts Catalog.
Notice, however the differences between the older master/slave cylinders and the later model parts.
Thread
Thread Starter
Forum
Replies
Last Post
Mrcody
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
10-18-2011 08:03 AM
Dobbinicus
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
06-03-2008 07:26 PM
geoff4224
1973 - 1979 F-100 & Larger F-Series Trucks
3
05-03-2008 10:44 PM
Widall
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
11
03-11-2004 06:39 AM