Hi all, I'm trying to install a long bed (8') on my 54 and can't find anybody that have the mounting blocks that go between the bed and frame except midfifty . Midfifty is out of stock and don't know when they will ever get them in.
Any help would be much welcomed.
Took off a flat bed and found the bed i'm replacing less: the blocks.
A pattern or used set that I can copy would be great.
Thanks, Joe
Wildomar, CA

 

Welcome to the board!

Here's a link with tons of information from a past member;
http://www.clubfte.com/users/earl/Re..._Material.html

This might be what you're after;


Bobby

 

Thanks Bobby, I will try and work from the drawing and let you know how it went.
Joe
1954 f250

 

When all else fails.....mock up, eyeball, shims and measure.

If you have some 250s close by or accessible online would be a great help for you too just see how it's set up.