When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 1" 4 hole Ford spacer with water heat plumbed in it.
It's alive! Holy cow! The 480 cfm carb, combined with the EFI manifolds, Offy DP and the 3.50 gearing has turned this old truck into a dragster! I ended up not hooking up the water heat to the carb spacer. Too many hoses! I have the intake heat though!
It's alive! Holy cow! The 480 cfm carb, combined with the EFI manifolds, Offy DP and the 3.50 gearing has turned this old truck into a dragster! I ended up not hooking up the water heat to the carb spacer. Too many hoses! I have the intake heat though!
I love the power my truck has right now! Very pleased!!!!!
The top mounting tabs broke off/cracked on my offy due to the exhaust manifold not supporting the weight. Just something to watch out for/prevent.
I wouldn't think that's the case. Neither of mine are supported by the exhaust and have been on some very rough trails and excursions without breaking in any way.
Edit: oops, just saw that was from last month. :-)