Does anyone know how I can replace the shut off valve at the bottom of the in cab fuel tank? I lost mine when I had it cleaned, I'm an idiot. Anyone know the specs?

 

The catalog shows the valve to be male 1/8"-NPT and as I recall the fuel tubing is 5/16". It also shows a bushing to reduce the outlet from 1/4" NPT to 1/8 NPT. I don't recall that but it was probably stuck in the tank outlet.

Green Sales shows to have 5, NOS Parts shows to have them for (gulp) $30... NAPA has them too but it's about impossible to find them in their online system.

 

I think the bushing is in there. I can't believe I lost that thing! You said Green Sales? Is that an auto parts house? I only have NAPA, but they are great for obsolete stuff for me.

 

Green Sales Company - Obsolete Ford parts

This is as close as I can find on NAPA's site: NAPA AUTO PARTS - ground plug brass valve

It's straight instead of 90-degrees. This one could be used with a 90-deg elbow on the outlet of the tank: NAPA AUTO PARTS - ground plug brass valve

Those are quality ground-plug brass valves.

 

7HC-9189 =

MUSTANG'S ETC. in Van Nuys CA has 1 = 818-787-7634.

NOS PARTS LTD in Waxahachie TX has 1 = 972-937-2201.

CARPENTER NOS OBSOLETE PARTS in Concord NC has 2 = 800-476-9653.

GREEN SALES CO. in Cincinnati OH has 4 = 800-543-4959.

RELIABLE OBSOLETE PARTS in Nashville GA has 5 = 229-686-5101.

Call around for the cheapest price, obsolete parts prices vary wildly from one source to another.

 

Thanks to all who helped me with this. I was able to get one from Green for about $20. I put it on, works great, but my fan problem is back. Please, see that thread for parts number help.