Happy Halloween everybody
Reduing my rear sliding window and just wondering if anybody has redone one or bought new just wondering where u can pickup the felt for the sliding window to slide in gotta buy some tks

 

Do a search and you will find a parts list and blow up of the rear slider. This would be for a factory slider, which I have never seen in real life.

 

E2TZ-10422B30-A (replaced E0TZ-10422B30-A ~ D4TZ-10422B30-A ~ D3TZ-10422B30-A) .. Sliding Rear Window KIT / Obsolete ~ 2 available NOS

Applications: 1973/96 F100/350 / 1997 F250 Heavy Duty & F350.

The felt runs (422A20 lower & 422A36 upper [see pic]) used 1970/79 are not the same as 1980/97, as the 1980/97 glass is thinner.

The 1970/79 felts are obsolete, no one has any NOS

Lower pic:

 

Thanks NumberDummy

 

I got some a while back from LMC, try JBG. Or here are a few places.

Ford F-150 Weatherstripping - JCWhitney

http://www.wescottsauto.com/WebCatal...indowParts.pdf

Old Ford Parts at C&G Ford Parts. Tens of thousands in reproduction.C&G Ford Parts

Super list of parts suppliers. Vintage Ford Pickup Trucks

 

Thanks 77&79F250 thaats what I'm lookin for

 

A pic is worth a 1000 words, but 10 sec on the web and 4 links is priceless. lol

 

Hey 77&79F250 I have another one for ya
I have a short box and cant seem to find side panels for it can a person get 8' box sides and cut them down to fit a short box just wondering. The box is a styleside box.
I see there is a place down South that reconditions them gonna give them a call this winter and see if what they have to say also!!
Thanks again YooperUno

 

Better off finding a box of hens teeth....than NOS short bed sides. I have heard that the place below has good panels, but did not dig that deep into their site.

Welcome to Tabco

E bay has a set for crazy $$$, you can buy a complete s/b parts truck and new patch panels for what that yahoo is asking. I think I remember seeing them in your other thread from hickory 1991

73 79 Ford Truck Short Bed Sides Panels | eBay

Maybe look here Vintage Ford Pickup Trucks

Look here post # 7 scroll down to the Parts Vendors & Resources section.

https://www.ford-trucks.com/forums/1...mpilation.html

 

Green Sales has 1 right side (D6TZ-9927840-C same 6 3/4' 1973/79). No Ford dealer or obsolete parts vendor has the left side which is specific to 1973/76 or 1977/79.

OP has a 1977 F150: 1977/79: Two different 6 3/4' types: One has a single fuel door opening (D7TZ-9927841-C), t'other has dual fuel door openings (D7TZ-9927841-E).

 

Yes ND we know you know how to locate hens teeth by the short bed (styleside) truck load. lol

 

Thanks everybody for the help just gotta get on the computer and check these out

 

Good man NumberDummy tks

 

Hey NumberDummy I cant figure out what your OP is not Obsolete Parts I take it need little help Tks

 

OP is "Original Poster", he is looking at your signature info and telling me (since he is the next thread in the list after my reply) what your OEM options are.

You are the OP or Original Poster of the thread.