Contrats, are you going with new w/s put in by someone else or want a used one?

 

I'm just gonna have Carsten come out and put one in so I can watch HIM struggle with it.

It also has a Lund visor on it if anybody wants it.

Rich. Did you get those wheels from the guy I gave you the number to?

 

Does the visor have cutouts for clearance lights? Next trick is the logistics.

 

With a sawzall anything can have clearance.....logistics....a reason to come to Springfield and Bass Pro and then its a quick drive to Performance Inc.

No wheel deal yet, to busy with "other" stuff........like always.

 

sounds good alan.. i hope you make a ton offa it .... alan does your truck have the trim around the windshield? i would sure like to see how that is put on. the one in mine whipped me ... if chip dont want the visor let me know.. ole rip could use one to keep the sun outta his eyes.. ha ha ha ha ha .. i didnt get much done today except re-syncing the carbs on the 51 chevy.. i got it running much better, so i guess ray is going to take it home tomorrow then to the upholstery shop for a new headliner.. now i have the room to tear into my newest truck project..

 

Chip. No clearance lights in the visor. Sorry about that.

RC. I guess we'll see.

 

Looks like it's going on Rip. I'll find one eventually for Ms Dent.

 

So you want a Lund sky visor that had the cab clearance light in it or one that will clear reg cab lights?

FYI they can be an A pillar rust magnet.

 

ohh no not rust!!!.. on my pristine truck..

 

Good Morning Everybody!

RC. I need to come down and get those frame horns anyway. Maybe we can trade the visor for the horns?

I never really dug how they looked anyway. Especially on a 2wd. A lifted 4x4 like Ka'Bluey I guess they look ok on. But not little trucks.

Off to work this morning. I got all the welding done on the trailer yesterday and Alice is back up and running. (I fixed the caliper problem) Now I just have to paint a police car pink. The '48 is supposed to be coming back for the last round of fab work too.

I'm trying to get all the work I can through the shop before my operation. If everyone pays me, I should be able to go in to the hospital caught up on the bills. (Whew!)

 

good morning all..
i have been out getting the white 4x4 going, i have to use it to move these cars around so i can get dustyns little MGB out.. i am gonna take a short break then get back to it.. alan whenever yer ready to come get the frame parts just let me know...

 

It'll be in the next day or two if the guy drops off the truck. I have to paint this cop car first. I'd still like to be able to drop the engine and trans in the '73 before I go into the hospital.

 

well aln ..just let me know.. i can get shook loose from here a day or two and we can get uncle jessie going

 

after we fix the speedometer... ha ha ha ha ha ha

 

Yeah, I need to do that, too.