The PA Chapter's "It's the Great Pumpkin, Charlie Brown" October 2014 Chat and B/S Thread
#346
I thought I was going to have to take today off. My daughter doesn't have school today, and our sitter had to back out at the last minute, from a death in the family. But, one of my daughters friend's mom told her she could stay at there house today.
#347
At least that ended up working out, circumstances being what they are. Certainly understandable that the sitter had to back out given the reason.
Starting to get parts in for my SD spring swap for the tOwBS. Just ordered my reverse shackle kit...now I need to round up B code rear springs and the traction blocks and it should be party time. My U code front springs are sitting in North Jersey.
Starting to get parts in for my SD spring swap for the tOwBS. Just ordered my reverse shackle kit...now I need to round up B code rear springs and the traction blocks and it should be party time. My U code front springs are sitting in North Jersey.
#349
Yup. It's a popular swap to do away with the OBS leaf springs and go to SD springs because they ride a bit softer. Plus, this will give me about 3" or so of lift, allowing me to run a slightly taller/wider tire.
I got all excited last night thinking I could put on my 33x12.5's I used to run on the Bull, but they're not load rated high enough - I need at least D's and the tires I have are C's. So...off to Craigslist with them to get a few bucks.
I got all excited last night thinking I could put on my 33x12.5's I used to run on the Bull, but they're not load rated high enough - I need at least D's and the tires I have are C's. So...off to Craigslist with them to get a few bucks.
#351
Yeah, the OBS guys talk about it a lot. In fact, the reverse shackle kit I'm buying is specifically for the SD swap. Sky Manufacturing in Oregon is where I'm getting it from. In fact the traction blocks are coming from One Up Offroad out there as well, through Riffraff Diesel.
#359
Yeah, the OBS guys talk about it a lot. In fact, the reverse shackle kit I'm buying is specifically for the SD swap. Sky Manufacturing in Oregon is where I'm getting it from. In fact the traction blocks are coming from One Up Offroad out there as well, through Riffraff Diesel.
__________________
www.ATSsprings.com
Ask About our Ford-Truck Forum Discounts! (1-888-943-8287)
"We sell parts and experience"
www.ATSsprings.com
Ask About our Ford-Truck Forum Discounts! (1-888-943-8287)
"We sell parts and experience"
#360
Yeah the Sky kit came pretty highly recommended by a couple of folks. Precision Metal Fab has a nice setup too, but in this case I'll be saving about $70 going with Sky.
The U codes are laying in Jersey. Can always go to V's if I don't like them easily enough.
The U codes are laying in Jersey. Can always go to V's if I don't like them easily enough.