Could anyone please tell me the torque specs for the various attaching nuts of the front hub assembly for the 99 F150 4x4 5.4L (large nut on spindle, mounting bolts to back of spindle, etc if any) ? I will need them to put everything back together after checking the tone ring for my ABS problem. Thanks very much.

 

the center axle nut is 200 ft pounds. THe 3 bolts that hold the hub to the spindle are probably 12 mm and at least grade 8.8hso that would be about 80 ft pounds. I have never torqued the 3 mounting bolts. Just put a box end on them and smack a few times with a 2 pound hammer.