OK…. call me a dumb*ss. I can't find the 4 screws that hold the glove box door onto the dash on my '87 F350. What am I missing?

 

i would not call you a dumb*ss. a senile old fart yes, but never a dumb*ss.


















look under the dash lip.
they are on the bottom of the hinge going up into the dash.













from one senile old fart to another.

 

Thanks TJC but it's easier than that. You just pull the door cable retainer pin off and the door comes off on two pivots… no tools required.

Took a while to figure that out…

I promised my bride I'd get busy fixing her jeep after i replace that heater core and get a stock car reassembled and off of my lift… let the games begin!

 

good to know about the pivot points. i always unscrewed the hinge.
or maybe the hinge was on the older the trucks.

 

I believe you are correct...