Buyer beware - shop located in Mesa AZ
#1
Buyer beware - shop located in Mesa AZ
Brooks Racing machine shop in Mesa, AZ:
Do NOT use them. I had them repair and rebuild a short block for a 6.0 diesel. They failed to recognize damage to the low pressure oil pump when they re-assembled the short block and ended up causing me additional $$$ for repair. They then proceed to blame the failure on my negligence. An addition to this, it took them OVER a month to do a simple bore and hone and replace pistons.
Mods, please move if this is not a correct forum.
Do NOT use them. I had them repair and rebuild a short block for a 6.0 diesel. They failed to recognize damage to the low pressure oil pump when they re-assembled the short block and ended up causing me additional $$$ for repair. They then proceed to blame the failure on my negligence. An addition to this, it took them OVER a month to do a simple bore and hone and replace pistons.
Mods, please move if this is not a correct forum.
Thread
Thread Starter
Forum
Replies
Last Post
Excursion Gary
1999 - 2003 7.3L Power Stroke Diesel
5
02-19-2013 11:26 PM
smallblock351w
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
8
03-02-2007 09:48 PM