I have one of the trucks that didn't get updated for the cruise switch fire hazard and - yup, you guessed it - it burnt. We got it out and are now trying to get it back going. Having a problem finding a wiring diagram. I have found "M" and "F" but no "K".

Thanks in advance.

Tony P

 

For those without a scorecard: Engine code "K" is an IDI Turbo

 

"M" is the IDI NA. With the exception of the location of the glow plug controller, yours should be the same...

 

Mine has a second plug for the control box at the firewall that is not shown on the "M".

 

Bump to top.

 

One plug is the bulkhead connector to get to the cab harness, and the other goes to the computer.
Both NAs and turbos have both plugs.

 

Thanks, then I would assume that the "M" schematic would be the same.

 

They are in my Ford manual.

 

Any way to get a copy?