When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
RC. I think the Olds will be closer in length to the Caddy. I'll have to measure the Caddy when I get it back from the engine guy. (we found a guy to do "pop and drops" so I have more time to do other stuff.)
Off to work at the lot. I just did a set of lower ball joints on a Durango last night before I left. That was, ....not fun. No tellin' what's in store for me today.
Off to work at the lot. I just did a set of lower ball joints on a Durango last night before I left. That was, ....not fun. No tellin' what's in store for me today.
Yup, done our Dangitdon'tgo ball joints, uppers and lowers at once. There's no good way to get the press good and square first try.
I got to rebuild the steering column in a '96 Impala SS. Some jack hole replaced a piece in there and screwed up the linkage. So I got the fun of taking it apart again and figuring out what was messed up and fix it. It's going back together now. I told the guy I used to do theft recoveries all the time. I forgot to mention that was 20 years ago! It took me a second to remember how everything comes apart.