5.0L Coyote 5.0l Ford OHC Coyote engine for 2011+

Replacement of 5.4 2V with 5.0 in F350 ZF6?

Thread Tools
 
Search this Thread
 
  #1  
Old 07-08-2014, 01:05 AM
garryk6's Avatar
garryk6
garryk6 is offline
Laughing Gas
Thread Starter
Join Date: Feb 2010
Location: Country
Posts: 762
Likes: 0
Received 1 Like on 1 Post
Replacement of 5.4 2V with 5.0 in F350 ZF6?

I have a 2002 F350 CCSB 4x4 with Zf6. I work my truck as snow plow trek, camper hauler, boat toter, etc. the 5.4 does well, but after driving a 2013 GT Premium this last week, I started thinking about swapping the 5.4 with a BOSS 5.0. I have read that the 5.0 is a bolt in for any of the mod motors. Motor mounts, bell housing etc bolts up. I also see that there is a standalone wire harness for the 5.0 with manual trans. Also my superduty has plenty of room in front to even use the mustang intake parts. But my concern is the alternator location. I am not sure it will work for the earlier superduties... Any thoughts?

Garry in Kodiak, AK

PS, I can't just go to a Ford dealer and look. There is a Ford dealer on the island, but they only have 4-12 cars and trucks at any one time.....
 
  #2  
Old 09-15-2014, 05:14 PM
Alexz265's Avatar
Alexz265
Alexz265 is offline
Tuned
Join Date: Jan 2014
Location: Baton Rouge
Posts: 293
Received 12 Likes on 10 Posts
It will bolt up but for the cost, you would be better off rebuilding your 5.4 with mild performance upgrades. I do love mine though in my F150. It has more hp, the same torque, and double the mpgs as my F250 with a 460.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
steelers06steelers
2009 - 2014 F150
11
01-12-2024 10:39 PM
medic2586
2004 - 2008 F150
23
01-12-2024 10:36 PM
Big-Red-Lariat
2009 - 2014 F150
45
10-01-2014 10:54 AM
mksmth
2009 - 2014 F150
16
09-25-2014 09:07 PM
roller57
2009 - 2014 F150
35
07-28-2013 09:46 AM



Quick Reply: Replacement of 5.4 2V with 5.0 in F350 ZF6?



All times are GMT -5. The time now is 01:05 PM.