Between Rails Fuel tank swap
#1
Between Rails Fuel tank swap
Looking for suggestions on a fuel tank swap for my 53 F-100. I know this is not the 53 forum but I'm getting no response there. Anyway I have seen the mustang tank swap but I'm looking for a side fill tank where the Mustang is a back fill through the bed floor. Any suggestions' build ics of a side fill tank between the rear frame rails?
#4
You're welcome.
A coupla things to be mindful of:
1. TP Daniels' (4x4) filler is via the rear fender well. No so good on a 2wd. Below is a pic of a 69 coming up through the bed but filled through bed rail with a pop-up cap.
2. The rear crossmember has to be moved back. The tank is about 25 inches long (fore and aft) so plan accordingly for the bumper mount and other hardware.
A coupla things to be mindful of:
1. TP Daniels' (4x4) filler is via the rear fender well. No so good on a 2wd. Below is a pic of a 69 coming up through the bed but filled through bed rail with a pop-up cap.
2. The rear crossmember has to be moved back. The tank is about 25 inches long (fore and aft) so plan accordingly for the bumper mount and other hardware.
Thread
Thread Starter
Forum
Replies
Last Post
pholmes350
1957 - 1960 F100 & Larger F-Series Trucks
2
06-29-2014 10:56 PM