Category: Accessories
Price: $1
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): Prelude
Item Condition: NY
Engine: Part suitable for gas truck

looking for bell housing for 1977 300cid to mount 4 speed transmission thanks

 

Do you have the engine perches for a 300 six? I need some that will work with a 78 F150 4WD.

 

I could use the blue dash panel. Also, if you have them, two of the small pieces that sit inside the padded arm rests - the things look like little cups that your fingers pull on when you pull the door shut (so you're not pulling on the padded arm rest itself).

I notice one other thing I could use. It looks like my truck (1976 F250 4x4) has cut outs in the interior sheet metal corners for shoulder strap seat belts, but someone took them out and converted it to just lap belts. Do you have the shoulder strap seat belts? Thanks again.

 

I messed up my reply post and put my reply to part of your post inside the blue shaded area that's supposed to be just the quote of yours.

This part was from me - When you get them out, I'd be interested in the steering box and pitman arm. I'm in 80303 is supposed to be my reply about those parts.... me and my uneasy truce with computers ......

 

I am looking for left and right inner door panels red (Plastic Part), Ash tray, The box part of the glove box (not the door), Two good condition retractable seat belts. For my 77 F150. Please PM or email me if you can assist.

 

Looking for a OEM grill surround with no dents or scratches fairly good condition, I have the square headlight buckets and center grill. Just the aluminum anonized grill surround, pics would be great, thanks OEM78 Mitch

 

sorry Mitch cant help you

 

Howabout the round headlight buckets and trim from either of the 78s? Shipped to 06111.

 

I was also waiting for him to pull the parts and get me a real shipping quote,not just a guess on the pitman arm and steering gear. so goodluck with that swolh

 

looking for stock air cleaner 302 v-8 2 brl ?

 

did you still have the grille frame

 

Do you have a front windshield for 1978 f150?

 

Do you have the section of the engine side wiring harness that goes from the firewall to the coil/distributor/oil pressure sender/temp. gauge with all of the connectors intact? I am needing one to work with a '76 V8 wiring harness.

 

I'm looking for F250/350 front sway bar mounting brackets. They are mounted to the I-beam , under the front coil spring , held down by the large radius arm bolt. In other words a real pain to remove....

let me know if you have a pair.

thnx,
Frank

 

I need a complete wire harness under hood and under dash with the gauge from dash to match as they are different please let me know if you have