Guys I have the trans all back together but have found 2 different nut specs. 1 is 26 ft/lb the other is 35 ft/lb with threadlocker red. 26 seems awful light. never used thread locker on a TQ nut before either. HELP

7.3l 4r100

Thanx

 

Everything I can find says 26 ft/lbs. I'm pretty sure that was what the Haynes manual said when we put my engine in, too.

 

26 ft-lbs should be correct for the stud type. 35 is for those with bolts.

 

Good info.. I'm getting ready to pull my trans