5.4L cam phaser tear down
#1
5.4L cam phaser tear down
Hey so im new here and did a lot of searching into doing the cam phaser timing chain tear down. Needless to say there is lots of info on doing the F150 but not a whole lot on the F250. There are a few differences and a few tricks I learned while doing the job. If any one is interested I can make a post of what I did and some of the differences and pics from what I found inside my engine and what my cost was to do the job and time line. K did all the work myself with some help from my dad hand in me tools byits a fairly simple job just time consuming
#2
#4
Hey so im new here and did a lot of searching into doing the cam phaser timing chain tear down. Needless to say there is lots of info on doing the F150 but not a whole lot on the F250. There are a few differences and a few tricks I learned while doing the job. If any one is interested I can make a post of what I did and some of the differences and pics from what I found inside my engine and what my cost was to do the job and time line. K did all the work myself with some help from my dad hand in me tools byits a fairly simple job just time consuming
I'd say most of us with 5.4s would like to see a thread on this---by all means post it---I'll sure check it out, Dennis, Old Vietnam Vet.
Thread
Thread Starter
Forum
Replies
Last Post
Jrock909
1987 - 1996 F150 & Larger F-Series Trucks
2
01-02-2007 01:04 AM