as the title says.....What Dual Steering Stabilizer are you running in your 1999-2004 leaf sprung superduty???

I am preparing to install a 6" superlift in my 04 f250 and don't want to waste money experimenting with dual shock stabilizers.

*I would prefer a bolt on kit that doesn't require modifying the stock suspension mounting points.

please include a picture of your setup (preferably your truck, not an internet product image)

 

nobody? really? nobody?

 

I'm running the dual bilstein kit from top gun customz



older pic right after i installed it

 

any pictures of the brackets where they attach to the steering?

 

this is the only close up pic i currently have

the big center bracket bolts to the side of the front diff and hangs out over the steering linkage. the outside ends of the stabilizers bolt to the linkage with brackets and u-bolts.

 

I'm running the skyjacker dual setup
[IMG][/IMG]

And before I took the boots off
[IMG][/IMG]

 

Sorry no pictures (will try later. My set up is a ProComp with Rancho 5410 stabilizers. I'm going to do a little brand bashing here and say DO NOT buy Rancho 5410s. I have returned 6 or 7 sets of these sometimes after 1 week in service Junk! I was looking for the UPS truck today for my new set up from Precision Metal Fab w/ Bilstein stabilizers that looks identical to the Top Gunz setup pictured above. Yea it's a little more (ok a lot) than most set ups, U know the saying You get what you pay for, its true.

 

Why only leaf sprung?

 

I'm running a pro comp 6.5" and 37"s with the stock unit with out any troubles on a 2001 F250 CC short bed