I getting ready (as soon as the two feet of snow, that seems to be everywhere, is gone) to pull all 4 exhaust sensors and treat with anti-seize and start carrying a spare sensor. Since I don't have any anti-seize now I'll need to get some. Any recommendations as to brand or specific type from the wise diesel sages here assembled ?

Thanks!!

 

I use Loctite and Master brand, but I'm not wise...just what I've bought

 

Pretty much any anti seize will be fine. As Savage stated those are fine brands.

 

Permatex has several anti-seize compounds that work well and are readily available in your area.

 

Here's what I've used for years. Just have to be sure to mix it well with the applicator. It tends to seperate if sitting for awhile.

 

any anti-seize will work, but copper anti seize is best for stainless.