IMPORTANT Michigan BS - Required Reading!
#9962
Rich if you haven't found a builder yet I can give you my dad's number.
And it's much easier to buy built than new and remodel. So as you smash through a wall you can think, "this was someone's dream once."
And it's much easier to buy built than new and remodel. So as you smash through a wall you can think, "this was someone's dream once."
#9964
Would he come over this way to build? They have a "preferred builder" network that they use.
it's going to be a 32X48, 12' ceiling with 2 overhead doors and one entry door. steel roof and steel siding. Ask him what he would charge. The land is really flat where it's going, I just need to get the trees and stumps out and add in some fill sand. he would not have to do any excavating.
it's going to be a 32X48, 12' ceiling with 2 overhead doors and one entry door. steel roof and steel siding. Ask him what he would charge. The land is really flat where it's going, I just need to get the trees and stumps out and add in some fill sand. he would not have to do any excavating.
#9965
Rich it doesn't seem like he'll have a problem coming out there (He doesn't know exact hours on drive yet though, just knows you're on the west side.)
But he's going to work some numbers up in the next few days he said.
But he's going to work some numbers up in the next few days he said.
#9967
#9969
That mount took me about 6 hours to make! I bolted it to an 1/8" plate then bolted the plate to the bed frame. The blue thing is a fuel cell I picked up for a good price. It's just sitting in there. I have plans for that. I'll admit about 2 months went by without touching the truck at all! Currently I'm on day 16 of 24 straight and throwing my hands up and only working 8 hours today, yesterday's 14 hours day was rough. My wife and I are having a date night tonight.... Going shopping for parts for it at the junk yard!! Haha haha!
The dome light is fine, I plan to take a lot of extension cords with me when I take it out.
I also bought axles, for sure the rear needs to be lengthening for now. I'm also using the old condenser as a trans cooler it's mounted in the picture too on the radiator. My daughter and I installed a reverse manual valve body a couple weeks ago. A friend of mine and I put in a high stall converter... It's coming along
I almost bought another ******. I have to call guy today and tell him I'm not going to
The dome light is fine, I plan to take a lot of extension cords with me when I take it out.
I also bought axles, for sure the rear needs to be lengthening for now. I'm also using the old condenser as a trans cooler it's mounted in the picture too on the radiator. My daughter and I installed a reverse manual valve body a couple weeks ago. A friend of mine and I put in a high stall converter... It's coming along
I almost bought another ******. I have to call guy today and tell him I'm not going to
#9972
I think we all enjoy it, one of the reasons we create new projects. Or fine tuning existing ones. I seem to keep myself so busy with house projects that I don't have time for vehicle projects. Could be the lack of space for the vehicle projects also. idk
Don't forget the GTG on Sunday if you can make it.
Don't forget the GTG on Sunday if you can make it.
#9974
OK so got a question
where is the best place to purchase a 2 post lift and what would be the best size? i am ready to put one in the barn and think you all might have some ideas on where to get the best price?
where is the best place to purchase a 2 post lift and what would be the best size? i am ready to put one in the barn and think you all might have some ideas on where to get the best price?
#9975
This guy is in Rockford, this is what I have been eye balling. maybe I'll get up there next year and check him out.
12,000# 2-Post Auto Lift Car Hoist NEW!
12,000# 2-Post Auto Lift Car Hoist NEW!