What offset rim works the best on a 52 F1 with stock front axle to fill wheel wells and look great?

Thanks,

Oscar

 

Might be easier to just measure the clearances yourself and figure the backspace that would work best, all sizes of rims out there plus each rim size can take different sized tires, section width and heights come into effect now.

Lots of good charts to help in picking sizes, google around.

Just did my whole truck, but not your set-up.

 

I am running a stock type 15" wheel reversed about an inch with 205/75-15 tires. Truck is also lowered a couple inches.....

 

Here's a great tutorial on how to measure for your new wheels (ie. backspacing, offset, diameter, and width).


Wally

ps. Here's a good reference for tire measurements based on sizes. http://www.tirerack.com/tires/tirete...e.jsp?techid=7