When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You will probably have more luck if you post this in this Forum's Marketplace. On the home page scroll farther down past where you click on us here at 67-72 ford trucks.
I have one on my 68 camper special with a 460....have seen it on a 77 f350 with the 360 also.....my cap was alum. so I gave it a brushed alum. look and painted the base body color.
My first one I made was like his,in the pic then found it would hit my oil filler cap. So made up the second one from an 80's 5.0 with alum cover and rear side vac. door and flex tubes. Some of The 80's 5.0 mustang comes with dual runner on them. But they droop down at the end of the runner that would also hit my oil cap filler tube. This why I made up the one it the picture..
orich
Hell if there's a good enough market I'd make these up