New cam phasers. These are $232.63 each x2 = $465.26

 

Camshafts polished..

 

Chamber...

 

Good write up

 

Lots of effort there. Should run great!

 

Thanks. I am taking the intake down to the shop right now. I will try to take pics....

 

No, they don't.

They recommend a 5W-20 that meets Ford spec WSS-M2C-930-A, which has now been replaced by WSS-M2C945-A. Most any conventional SN/GF-5 oil in 5W-20 will meet this spec.

Sent from my HTC ONE using IB AutoGroup

 

More pics....

 

 

 

Great info here, have not seen some of these things apart before.
I'm sure it will run like a champ when you're done.
Well done.

 

Thanks. I havn't spent a lot of time on here, but it seems that there are not many post with pics of the details inside these engines. I thought others might like to see some of the technical stuff inside. The intake manifold itself is quite an interesting piece I thought.

 

It is nice to see a complete write up. I would like to do a full rebuild in the next few years so now I know what I'm dealing with a little better

 

please let us know what the total cost of project is and when it's all done would you recommend doing a rebuild or a crate engine.

 

Awesome. With decking the block and heads when do become worried about valve clearance?