hello out there
#1
hello out there
this is my first post/thread ever it took a morning to get this far my sons grandpa gave him a wonderful gift its a 1990 ford f 250 custom truck it just needs a lot of work help is what we need to adjust the rods and to understand the repair manual is a challenge I have replaced parts before but never to this exstream
#2
Hi dutch Welcome to FTE. One thing you will notice at FTE is there is a large community of Ford owners that are always willing to help anwser a question or throw their two cents to try and solve a problem someone may be having with their Ford.
You may want to make a post in the thread that corresponds to your year and make of vehicle and pose your question in there and see if the folks here at FTE can help you out.
Don't forget to join the chapter from your state/province and meet some of your Fellow Ford owners. Enjoy your time here at FTE
You may want to make a post in the thread that corresponds to your year and make of vehicle and pose your question in there and see if the folks here at FTE can help you out.
Don't forget to join the chapter from your state/province and meet some of your Fellow Ford owners. Enjoy your time here at FTE
#3
Hey there Mr. dutch, your kid sure has a nice gramps and maybe you'll need some help, the best place to find info on that truck is here: 1987 - 1996 F150 & Larger F-Series Trucks - Ford Truck Enthusiasts Forums
I hope you get all the help you need, and both you and your kid enjoy the site (make him join too), welcome to FTE!.
I hope you get all the help you need, and both you and your kid enjoy the site (make him join too), welcome to FTE!.
#4
Hi, welcome to the site.
__________________
Torklift International – Towing, Suspension, Tie Downs, Steps
Call me direct: 1-800-246-8132
Visit our Blog: http://www.torklift.com/blog
Torklift International – Towing, Suspension, Tie Downs, Steps
Call me direct: 1-800-246-8132
Visit our Blog: http://www.torklift.com/blog
Thread
Thread Starter
Forum
Replies
Last Post
BradinAlabama35805
New Member Introductions
3
10-07-2013 12:10 PM