Just wondering if any other Dana 70 hubs were interchangeable with a 70U. I have spun a race, destroyed a bearing and almost a spindle. I went to the lovely El Paso yards today to find some Dana 70s but not U's and I don't know if they are interchangeable. The one I have found were mostly either DRW and I'm a SRW and the Dana 70-1SU or the super 70 as some call it. I know the 70U uses some 60 components, but don't know about hubs. I will post in the wanted section if I can find it since I haven't been on in awhile as I was over the pond again for awhile in hopes maybe some one has a few they don't need more than money. Thanks all!

 

The key to finding out is finding a place on the web, or someone that sells Dana parts(Napa?) and comparing part numbers. There are a few people on here that have parts books, I don't know if their books have a breakdown of the dana axles.

I do know somewhere on the Dana/Spicer site they have a good breakdown of the front ttb parts. Maybe they have a section for the rearends also?

 

P.S. I just put in "dana axle pdf" in google, and got lots of hits that go directly to the dana site.