I am doing the bearings in the spindles and rotors and putting on a pair of Warn premium hubs and was wondering what to use to clean out all the grease from the inside of the rotors, spindles, to the ends of the axleshafts. The reason i'm doing this is because before i bought it it has seen more than its fair share of mud and neglect after finding the passenger hub not having any form of bearing grease in it. So as of right now i have no four wheel drive and i am trying to fix it before hunting season this fall.

 

Ive alays just used brake cleaner but youve got too be carefull with the old seals on the back it can dry them out and cause them to not properly seal, but hopefully your changing them some you wont have too worry about that