South Texas Tech Day # 3
#62
Chris, you can get the ball joint press from the Irish of O'reilly auto. I did mine Spring 2011 with their tools and didn't have a problem. Better yet, I'll pick it up, they sometimes don't include the right parts and you really have to know what to look for.
#63
#64
Join Date: Jun 2003
Location: Damon (South East Texas)
Posts: 8,298
Likes: 0
Received 12 Likes
on
11 Posts
I will hopefully making in out there on Saturday morning. I have a ball joint press and the adaptor kit. I believe Christof has one as well. I am planning to bring my trans jack again this time and some SS tubing to help with Mark's Hutch & Harpoon mods. Is there anything else special that needs to brought. I usually try to work up a list so I don't forget anything.
#65
I will hopefully making in out there on Saturday morning. I have a ball joint press and the adaptor kit. I believe Christof has one as well. I am planning to bring my trans jack again this time and some SS tubing to help with Mark's Hutch & Harpoon mods. Is there anything else special that needs to brought. I usually try to work up a list so I don't forget anything.
It wouldn't be a tech day without you Roland'
#68
#69
Join Date: Jun 2003
Location: Damon (South East Texas)
Posts: 8,298
Likes: 0
Received 12 Likes
on
11 Posts
Does Mark have a new wear ring? I haven't talked to him lately. Do you have the damper installer? I have a Snap On bolt puller set and MAC damper installer set. I heated the wear, to expand it, when I did one on International 530E.
#71
#72
#73
I should have jumped in on this earlier...
I won't be coming, but I do have some parts that were never installed on my old 7.3 that I sold in February.
I know I have the following:
RiffRaff FRx (new)
RiffRaff HPx (new)
80% complete Mechanics o-ring kit
Complete Fuel Bowl Seal kit
Stock Turbo off an '02 (has 150k miles on it and could probably use a rebuild)
I think there are some other things, but just thought I'd throw these things out there. If any of you guys need these things shoot me a PM. I have already talked to Roland and will be able to get parts there through him assuming he still makes the trip.
Kyle
I won't be coming, but I do have some parts that were never installed on my old 7.3 that I sold in February.
I know I have the following:
RiffRaff FRx (new)
RiffRaff HPx (new)
80% complete Mechanics o-ring kit
Complete Fuel Bowl Seal kit
Stock Turbo off an '02 (has 150k miles on it and could probably use a rebuild)
I think there are some other things, but just thought I'd throw these things out there. If any of you guys need these things shoot me a PM. I have already talked to Roland and will be able to get parts there through him assuming he still makes the trip.
Kyle
#74